•Sida loo soo saaroBacaha Xirmada Leh

Marka hore waxaan u baahanahay inaan ogaano qaar ka mid ah macluumaadka aasaasiga ahBoorsada Tolmada leh ee Lamination, Sida

• Baaxadda bacda

• Miisaanka boorsada loo baahan yahay ama GSM

• Nooca tolida

• Shuruudda xoogga

• Midabka bacda

IWM.

• Baaxadda bacda

Bacdu waxay ka samaysan tahay noocyo kala duwan

Sida

Bacaha ka samaysan dharka tuubada- bacaha wax lagu xidho ee caadiga ah, bacaha valve. IWM.

Bacaha ka sameysan dhar fidsan - Bacda sanduuqa, Baqshadda baqshadda, iwm.

• Miisaanka pp bac-xidhka ama GSM ama Gramage (luqada suuqa maxaliga ah)

Haddii aan ognahay mid ka mid ah GSM ama GPB (Gram per bag) ama Gramage (loo isticmaalo suuqa maxalliga ah), waxaan si fudud u xisaabin karnaa waxyaabaha kale ee la xiriira sida, Shuruudaha Waxyaabaha Ceyriinka ah, Cajaladda Diida, Tirada dharka la soo saarayo, Tirada cajaladda iwm.

•Nooca tolida

Waxaa jira noocyo badan oo tolid ah oo lagu sameeyo bacda.

Sida

• SFSS (Kaliya Laab Laab ah)

• DFDS (Laba laab Laab ah Tolmo)

• SFDS (Hal Laab Laab ah oo Tol ah)

• DFSS (Laba Laab Hal Tol ah)

• EZ La Laalaab

• EZ Laab La'aan

IWM.

• XOOGGA BAASHADA

Si loo go'aamiyo cunto karinta isku dhafka ah, waxaa aad muhiim u ah in la ogaado baahida xoogga, tan ugu muhiimsan waa isku darka qashinka ee kharashka, sababtoo ah marka loo eego baahida, noocyo badan oo wax lagu daro ayaa lagu daraa cuntada, kuwaas oo si toos ah ula xiriira xoogga iyo dheerayn %.

•MidabkaBoorsada Tolmada leh

Waxaa laga samayn karaa midab kasta sida baahida loo qabo, Maaddaama isku-darka ay tahay habka ugu muhiimsan ee kharashka, sida looga baahan yahay, noocyada kala duwan ee wax lagu daro ayaa lagu daraa cunto karinta iyo sida qiimaha midabada kala duwan ee dufcada master-ka ayaa sidoo kale ka duwan.

Aan tusaale u soo qaadanno si aan xisaabinta u sii fahanno.

Tusaale ahaan 20 "X 36" bac foorno oo cad oo aan dahaaran ahayn oo miisaankeedu yahay 100 g, shabag 10 x 10 ah iyo cirifka sare iyo hoose waa inuu lahaadaa SFSS, oo tolnimo fidsan. Tirada 50000 boorso. (GSM iyo GRAMAGE ayaa sidoo kale looga hadli doonaa tusaalahan.)

Marka hore qor macluumaadka la hayo.

• GPB - 100 garaam

• Cabbirka - 20 "X 36"

• Tollida - Hemming Sare iyo Hoosta SFSS

• Nooca Tolmada - Flat

• Mesh 10 X 10

Hadda aynu go'aansanno dhererka goynta marka hore.

Maaddaama, tolidu ay tahay cirifka sare halka hoosena uu yahay SFSS, ku dar 1″ hemming iyo 1.5″ SFSS cabbirka bacda. Dhererka boorsada waa 36 ", ku dar 2.5" ie dhererka la jaray wuxuu noqonayaa 38.5 ".

Hadda aynu tan ku fahanno habka midaysan.

Maadaama, waxaan u baahanahay dhar dheer oo ah 38.5 " si aan u samayno boorso.

Marka, si aad u sameyso 50000 boorso, 50000 X 38.5″ = 1925000″

Hadda aan mar kale ku fahanno habka unitary si aan u ogaano mitirka.

Tan iyo, 1 mitir gudaha 39.37 ″

ka dib, 1/39.37 Mitir 1"

Markaa “1925000″ = 1925000∗1/39.37

=48895 mitir

Maadaama noocyo badan oo qashinka ah sidoo kale la sameeyo marka la samaynayo dhar, sidaas darteed qaar % ka badan ayaa laga sameeyaa dharka loo baahan yahay. Caadiyan 3%.

Markaa 48895 + 3% = 50361 mitir

= 50400 mitir oo wareeg ah

Hadda, waxaan ognahay inta dhar ah ee la sameeyo, Markaa waa inaan xisaabinnaa inta cajalad la samayn doono.

Maadaama miisaanka bacdu yahay 100 garaam, hal shay oo halkan lagu xuso ayaa ah in miisaanka duntu ay sidoo kale ku jirto miisaanka bacda.

Habka saxda ah ee lagu ogaan karo miisaanka dhabta ah ee dunta loo isticmaalo tolida waa in la furo dunta bacda muunada oo la miisaamo, halkan waxaan ku soo qaadaneynaa 3 garaam.

marka 100-3=97 garaam

Tani waxay ka dhigan tahay 20 "X 38.5" dhar miisaankeedu yahay 87 garaam.

Hadda waa inaan marka hore xisaabinnaa GPM, si aan u ogaano tirada guud ee cajaladaha la samaynayo, ka dibna GSM ka dibna Denier.

(Naxwaha lagu isticmaalo suuqa maxaliga ah macnihiisu waa GPM oo loo qaybiyay ballac tuubbo ah oo inji ah.)

Mar labaad ka fahan habka midaysan.

Fiiro gaar ah:-Cabbirku dhib ma laha in la xisaabiyo GPM.

Haddaba,

Tan iyo, miisaanka 38.5 ″ dhar waa 97 garaam,

Markaa, miisaanka 1 ″ dhar wuxuu noqon doonaa 97/38.5 garaam,

Marka, 39.37 ″ oo dhar ah ayaa miisaamaya = (97∗39.37)/38.5 garaam. (39.37" in 1 mitir)

= 99.19 garaam

(Haddii naxwaha dharkan la helayo, markaa 99.19/20 = 4.96 garaam)

Hadda GSM-ka dharkan ayaa soo baxaya.

Maadaama aan naqaan GPM, waxaan mar kale ku xisaabinay GSM habka unitary.

Hadda haddii miisaanka 40 "(20X2) uu yahay 99.19 garaam,

Marka, miisaanka 1 ″ wuxuu noqon doonaa 99.19/48 garaam,

Sidaa darteed miisaanka 39.37 wuxuu noqon doonaa = garaam. (39.37" in 1 mitir)

GSM = 97.63 garaam

Hadda ka saar diidaha

Dharka GSM = (Mesh Warp + Mesh weft) x Denier/228.6

(Daawo muuqaalka sharaxaada si aad u ogaato qaacidada buuxda)

Denier = Dharka GSM X 228.6 / (Mesh Warp + mesh weft)

=

= 1116 diiday

(Maadaama kala duwanaanshaha diidmada ee warshadda cajaladu ay ku dhowdahay 3 - 8%, Markaa diidista dhabta ahi waa inay ahaataa 3 - 4% in ka yar diidmada la xisaabiyay)

Hadda aynu xisaabinno inta cajalad la samaynayo guud ahaan,

Maadaama aan ognahay GPM, ka dibna mar kale ku xisaabi habka midaysan.

Tan iyo, miisaanka 1 mitir oo dhar ah waa 97.63 garaam,

Sidaas awgeed, miisaanka 50400 mitir dhar = 50400 * 97.63 garaam

= 4920552 garaam

= 4920.552 KG

Waxaa jiri doona xoogaa cajalad ah oo ka hadhi doona ka dib marada ku taal xargaha, markaa cajalad dheeraad ah ayaa loo baahan doonaa in la sameeyo. Guud ahaan, miisaanka hal bobbin ee soo hadhay waxaa loo qaataa 700 garaam. Markaa halkan 20 X 2 X 10 X 0.7 = 280 kg oo dheeri ah. Wadarta cajalad 5200 KG Qiyaastii.

Si aad u fahamto xisaabaadka iyo qaacidooyinka la midka ah, daawo fiidiyaha lagu bixiyay sharraxaadda.

Haddii aadan waxba fahmin, markaas hubaal ku sheeg sanduuqa faallooyinka.